- Elegant retractable awnings for patios and balconies.
- Engineered, tested and manufactured to the highest of quality control standards.
- Residential or commercial use.
- Structural aluminum and steel powder coated frame (no flaking, rusting, bleeding).
- Adjustable pitch from 0” to 24” (drop of the front bar).
- Motorized version available with manual override and remote control.
- Wind sensor available.
- Two or three (for 20’–24’ wide awnings) multiple chamber lateral arms with double stainless steel cables.
- Beauty-Mark® or Sunbrella water, fade and mildew resistant designer fabric.
- Wave-style valance, 10” in height, with matching braided UV trim.
- Wall brackets included, soffit and roof mount brackets available for an additional charge.
- Can be converted to Destin® model by adding protective hood.
- Fully assembled and ready to be installed DIY product (2-3 hours).
- Requires 1–3 installers (depending on size).
- Energy savings up to 30% in summer months.
- Will keep furniture and floors from fading.
- Meets Uniform Building Code requirements.
- 5-year limited manufacturer’s warranty.
How to select your Maui® retractable awning
1) Make sure that you have sufficient mounting space for your awning.
- Measure the length of wall space you have available for mounting the awning. You will choose the awning width A below, so it doesn’t exceed this measurement.
- The height B of the mounting space must be at least 9” for the entire width A.
- The height C from the floor to the bottom of awning must be at least 80” (ideally 8 feet).
2) Select the awning size (Width x Projection) below.
- Projection is the maximum distance from the wall to the end of your awning.
3) Select the fabric color or pattern below that best compliments your home.
- If you would like Sunbrella fabric, enter the fabric number in the space provided. Please be careful to enter the correct number.
- If you would like Beauty-Mark® fabric, select the fabric from the drop down menu.
or
4) Add a motor with manual override and remote control if desired.
5) If you added a motor, select the Left or Right side operation (facing the awning).
| Number of soffit or roof brackets needed
|
| Awning size | 8-10 ft | 12-14 ft | 16 ft | 18-20 ft | 20+ ft
|
| Brackets needed | 2 | 3 | 4 | 5 | 6
|
6) If your awning will be mounted to the soffit, select the required number of soffit brackets.
7) If your awning will be mounted on the roof, select the required number of roof brackets.
