Austin Standing Seam Window Awning

Base price: $290.00

The Austin Standing Seam Awning features a popular modern design suitable for both residential and commercial applications. Its pitch is adjustable during, or after, installation due to a proprietary hinged attachment system. It is easy to remove and reinstall if necessary, and requires no maintenance.

Snap-Lock standing seam steel panels with Galvalume® substrate and Kynar® paint finish
20-year limited warranty on panel finish (limitations apply for salty environments)
Commercial-grade construction to resist high wind and snow loads
May be folded down in the event of severe weather or to allow access to the area above the awning
Aluminum frame and support arms with clear anodized finish will never rust
Top flashing includes a caulking groove to seal the awning against the wall
Open sides provide for reduced wind resistance
Stainless steel assembly hardware
Concealed roof panel fasteners for improved weather resistance and aesthetics
All hardware is included for an easy assembly and installation
US Patent #'s D715,962, D738,533
Shop drawings and engineer sealed drawings and calculations are available

Choose your panel color here

A similar awning suitable for doors is available:

Austin Standing Seam Door Awning

A similar awning with overhead braces is available:

Austin Standing Seam Awning with Overhead Braces

View Ordering Instructions

How to order your Austin Standing Seam Window Awning

At least 3.5" of mounting space is required over the window.

1) Choose the awning width

Measure the width of your window, including any trim.
Select the awning width from the drop-down menu depending on where you will mount the support arms. The support arms may be mounted on the window trim or on the wall outside of the trim. Allow 1.5" on each side for the support arm brackets. The support arms cannot be mounted on shutters.
Please contact us if you need a more customized width. Custom widths are available in 1" increments and priced to the next larger width in the drop-down menu.
Please note that awnings will ship with the following number of support arms, depending on the awning width:

Awning width	Number of Support Arms
Up to 84"	2
85" - 168"	3
169" - 252"	4
253" - 288"	5

The support arms will be spaced evenly, unless requested otherwise by the customer.
Additional support arms are available. Please contact us if you would like to order additional support arms.
Larger widths are available. Please contact us if you need a larger width.

2) Choose the awning drop

The drop values are provided for an awning installed at a 45-degree angle. The awning projection is approximately 2" smaller than the drop.
The awning drop and projection are adjustable during the installation.
Custom drop values are available. Larger drops are available for larger orders. Please contact us if you need a larger drop.

3) Select your desired awning color

Select the awning panel color by clicking on the link below. The underside of the awning panels is always light grey. The awning frame and brackets have anodized aluminum finish.
Additional colors are available for quantities of 10 or greater or total widths of 360" or greater. Select any color from the Drexel Color Chart below and contact us with your selection.

Choose your panel color here

Drexel color chart